Solar EPC · Design, installation & maintenance across Bangladesh
Sector 16, Jolshiri Abashon, Purbachal, Dhaka
Saturday – Thursday, 10:00 – 18:00
01 / For homes & apartments
Turn an unused rooftop into a power plant. Cut your monthly bill, ride through load-shedding, and add nothing to the country's carbon load.
02 / For factories & warehouses
Factory roofs are the largest untapped generation asset in Bangladesh. We turn them into a hedge against tariff increases — and into compliance evidence your buyers now demand.
03 / Sell surplus to the grid
Under Bangladesh's Net Metering Guidelines, the surplus your roof exports is credited against what you import. We handle the design, the paperwork and the utility.
04 / For farms & agriculture
Solar-driven pumping for paddy, vegetables, orchards and fisheries — with no diesel to buy, carry, or account for.
Estimator
Move the sliders to your actual bill and tariff. This is an indicative model, not a quotation — a real proposal follows a roof survey.
Assumes ~1,400 kWh/kWp/yr, unshaded roof, ~৳78/Wp installed. Your figures will differ.
Indicative result
Avoids roughly of CO₂ per year — about trees’ worth of annual absorption.
The 70% rule, which utilities participate, how credit is settled, and the six documents that decide whether your application clears in four weeks or four months.
18 August 2026 · 3 min
A structured way to compare solar quotations: what should be itemised, which line items hide the real differences, and the three numbers that determine payback.
4 August 2026 · 4 min
Scope 2 emissions are now audited by buyers. Metered on-site generation has become compliance evidence, and that has changed the business case for industrial solar.
21 July 2026 · 3 min
It depends on size, roof type and equipment, but a useful benchmark for a well-specified grid-tied system in Bangladesh is roughly ৳70–90 per installed watt-peak. A 5 kWp residential system therefore lands in a broad band around ৳350,000–450,000. We give an itemised figure after a roof survey — never before.
A residential rooftop is typically two to five days on site. Industrial systems run from a few weeks to a few months depending on capacity. Net-metering approval runs in parallel and takes four to ten weeks from filing.
Through the monsoon, yes — output falls to roughly 30–50% on heavily overcast days but does not stop, and net-metering credit from the dry season offsets the shortfall. During an outage, a grid-tied system without batteries shuts down for safety; add battery backup if you need essential circuits to stay live.
Yes. We install nationwide — rooftop and industrial work across the major cities and industrial belts, and solar irrigation in agricultural districts. Travel and logistics are quoted transparently as separate line items.
Very little. Periodic panel cleaning during the dry season, an annual inspection of mounting, terminations and inverter, and monitoring you can check from your phone. We offer annual O&M contracts for industrial sites with performance reporting.
Start here
